Stress changes cause uneven growth in fluid-driven cracks

Varying stress levels along a fault cause rupture growth to become asymmetric.

Models often assume uniform in-situ stresses along a fault. This predicts rupture growth is symmetric about the injection point.

This work relaxes that assumption by accounting for linear variations with depth. It considers resolved shear and effective normal tractions.

The study uses a planar fault with constant friction under plane-strain conditions. It also uses constant overpressure from fluid injection.

Growth is governed by two parameters. The first is the fault-stress injection parameter T\mathcal{T}, which is the ratio between the initial distance to failure at the injection point and the effect of the fluid overpressure.

The second is the ratio of the diffusion length 4αt\sqrt{4\alpha t} to a stress-gradient length scale LcL_c. This scale is the initial distance to failure at the injection point divided by its gradient along the fault.

In the marginally pressurized regime, the rupture lags behind the pressure front. The relative asymmetry grows as 1.1 (4αt/Lc2)1/21.1\,(4\alpha t/L_c^2)^{1/2} and the up-dip tip accelerates compared to the down-dip tip.

Key facts

  • The stress gradient breaks the self-similarity of the uniform-stress solution.
  • In the critically stressed regime, the rupture outpaces diffusion by a factor of order 1/T1/\mathcal{T}.
  • The up-dip tip reaches ∼Lc\sim L_c earlier than the down-dip tip.

All sections

Edition