New design for combined sensing and communication antenna arrays

Researchers developed a beamforming method that accounts for antenna effects in compact dipole arrays.

A new beamforming design for integrated sensing and communication (ISAC) has been built. This design works for compact monostatic transceivers using dipole arrays.

The researchers used a multiport scattering model from method-of-moments simulations. They formulated a Cramer-Rao bound minimizing ISAC beamformer. This beamformer includes multiuser SINR constraints, per-port active reflection constraints, and a leakage budget.

The design accounts for distorted embedded patterns and beam-dependent active mismatch at power amplifiers. It also addresses transmit-to-receive leakage that raises the radar noise floor. A leakage budget is a limit on how much signal leaks from the transmitter to the receiver.

Designs that ignore coupling can miss SINR targets by up to 6.26.2 dB. They can also drive amplifiers to an equivalent VSWR above 3.33.3 at small spacings. The proposed design meets targets with an equivalent VSWR below 22 for spacings from 0.30.3 to 0.50.5 wavelengths.

The new design lowers the root Cramer-Rao bound by 3232 to 5353 percent for 8080 dB of self-interference cancellation. For 7070 dB, it lowers the bound by a factor of 3.43.4 to 5.65.6. An independent finite-difference time-domain model in openEMS confirms the leakage null and design ranking.

Key facts

  • The design meets targets with an equivalent VSWR below 22 for spacings from 0.30.3 to 0.50.5 wavelengths.
  • Coupling-unaware designs can miss SINR targets by up to 6.26.2 dB.
  • The method lowers the root Cramer-Rao bound by 3232 to 5353 percent for 8080 dB of self-interference cancellation.

All sections

Edition