New light-based system for Earth observation frequencies

A reconfigurable architecture generates sub-terahertz signals for measuring atmospheric properties.

Researchers investigated a reconfigurable self-oscillating microwave photonic architecture. This system generates a local-oscillator (LO) for Earth observation receivers.

The architecture uses an optoelectronic feedback loop. This loop contains cascaded Mach-Zehnder and phase modulation to create an optical frequency comb. An optical frequency comb is a series of light components with enhanced higher-order components.

Optical filters select the required comb line. A bandpass filter with a bandwidth of approximately 1010 GHz isolates a spectral region. A narrowband dual cavity Bragg grating ring resonator (BGRR) with a bandwidth of approximately 33 MHz provides final line selection.

The selected line combines with an optical reference. This process uses optical heterodyning to generate a millimeter-wave or sub-terahertz signal. The system can address 183183-GHz and 229229-GHz frequencies by tuning the OEO electrical filter.

Earth observation missions use microwave and sub-terahertz radiometry. These missions retrieve atmospheric parameters like temperature, humidity, and cloud properties. The 183183- and 229229-GHz spectral regions are particularly relevant.

Key facts

  • The architecture can generate 183183-GHz and 229229-GHz frequencies.
  • A dual cavity Bragg grating ring resonator (BGRR) provides a bandwidth of approximately 33 MHz.
  • The system uses an optoelectronic feedback loop to create an optical frequency comb.

All sections

Edition