Adding methanol to hydrogen fuel can improve engine efficiency

Replacing part of the hydrogen energy with methanol reduces pressure oscillations and increases thermal efficiency.

Hydrogen engines can be used for heavy-duty, off-road, and marine tasks. These engines are difficult to power with electricity. Hydrogen can help reuse existing manufacturing capacity.

Hydrogen has a high flame speed and a wide flammability range. However, these traits make it prone to abnormal combustion. This includes issues like backfire, pre-ignition, and knock.

Knock is an abnormal oscillation of cylinder pressure. It can be caused by the autoignition of unburnt gas. It can also be caused by fast and unstable combustion.

Researchers used a variable-compression Cooperative Fuel Research engine at 600 rpm. They replaced 20--50% of the hydrogen energy with port-injected methanol. They tested compression ratios from 8--12.

With pure hydrogen, oscillations in the 4--15 kHz range occurred. These happened before 10% of the charge burned in 97--100% of cycles. The maximum pressure-rise rate correlated with the maximum amplitude of pressure oscillation (MAPO).

Methanol slowed the deflagration. It replaced the high-flame-speed hydrogen and cooled the intake by 24--25 K. At 50% methanol, the 10--90% combustion duration increased 2.7--3.0 times.

At 50% methanol, the mean MAPO fell by 89--93%. During these tests, the indicated thermal efficiency rose by 2.4--7.8%. The spark timing was advanced by 13--19 degrees CA.

There is a trade-off regarding emissions. Formaldehyde emissions rose five to six times. However, nitrogen oxide (NOx) emissions fell by 49--85%.

Key facts

  • Methanol replaced 20--50% of the hydrogen energy.
  • Indicated thermal efficiency rose by 2.4--7.8% at 50% methanol.
  • Nitrogen oxide (NOx) emissions fell by 49--85%.
  • Formaldehyde emissions increased five to six times.

All sections

Edition