Titanium nitride coatings resist cracking from fission products
New research shows titanium nitride coatings maintain strength even when lanthanide fission products move into their grain boundaries.
Titanium nitride (TiN) coatings may reduce fuel-cladding chemical interaction (FCCI) damage. These coatings can retain grain boundary strength if fission products segregate to internal interfaces.
Researchers used first-principles segregation, decohesion, and bonding calculations. They evaluated six coincident-site lattice grain boundaries (GBs) in bcc Fe and TiN. Segregation energies, work-of-separation values, and traction-separation curves were measured.
Grain boundaries (GBs) are internal interfaces. Segregation is when fission products migrate into these boundaries. Work-of-separation measures the energy for complete interfacial cleavage. Peak traction measures ideal resistance to crack opening.
In Fe, Nd and Ce reduce work-of-separation and peak traction. The median work-of-separation retentions are and . The median peak-traction retentions are and .
In TiN, most decorated GBs preserve much of the clean response. The median work-of-separation retentions are and . The median peak-traction retention is for both fission products.
Bonding analysis shows the Ti-N network remains largely preserved after Nd/Ce segregation in TiN. This retention of GB strength provides a mechanistic descriptor for assessing coating susceptibility to FCCI-assisted corrosion cracking.
Key facts
- Nd and Ce segregate favorably to both Fe and TiN.
- TiN shows higher median segregation energies than Fe.
- The Ti-N network remains largely preserved after Nd/Ce segregation.