New way to predict how water moves and transfers heat

Researchers used simulations to show how changing water properties affect friction and heat transfer.

Researchers used direct numerical simulation (DNS) to study how liquid water moves in a plane channel. They looked at how temperature-dependent viscosity and thermal conductivity change the flow.

The friction coefficient changes by −39%-39\% to +32%+32\% compared to constant-property flow at the same bulk Reynolds number. The heat transfer coefficient changes by up to a factor of 2.32.3.

Empirical correlations deviate from the DNS by up to 26%26\%. The wall friction Reynolds number misrepresents the range of turbulent scales. Near-wall streaks of velocity and temperature have a common spacing when scaled with the local viscous length.

The researchers mapped mean profiles onto constant-property flow using integral transformations. They used empirical corrections of the eddy viscosity and diffusivity calibrated on the DNS. This approach predicts friction and heat transfer within 2%2\% of the DNS, except at the lowest Reynolds numbers.

The same corrections introduced in the Spalart--Allmaras model halve its friction error. This method extends an approach developed for air to liquids where conductivity is not proportional to viscosity.

Key facts

  • The friction coefficient changes by −39%-39\% to +32%+32\% compared to constant-property flow.
  • The heat transfer coefficient changes by up to a factor of 2.32.3.
  • The new method predicts friction and heat transfer within 2%2\% of the DNS except at the lowest Reynolds numbers.

All sections

Edition