A temperature sensing system built into clothing
Researchers developed a wearable sensor array using conductive textiles to map body surface temperature.
A new wearable temperature sensing system uses conductive textiles. This system can map temperature distributions across a body surface.
The textile itself acts as a shared bus for DC power delivery and data communication. Each sensor node is a compact, battery-free circular board. These boards have a diameter of 21 mm and a weight of 0.9 g.
The system uses address-based half-duplex UART with master polling. UART is a type of data communication. A shared textile bus allows for flexible node placement without individual wiring.
An 18-node sensor array was implemented on a garment worn by a mannequin. The array captured temperature variations from a heat gun at approximately °C. It achieved a refresh rate of 99.2 Hz.
Continuous monitoring of body-surface temperature distributions may provide useful information for wearable health and thermal-condition monitoring. This provides a practical basis for garment-integrated body-surface monitoring.
Key facts
- The sensor nodes weigh 0.9 g and have a diameter of 21 mm.
- The system uses a conductive-textile bus for power and data.
- An 18-node array captured data at a refresh rate of 99.2 Hz.