Thin membranes covered in graphene change Casimir forces
Replacing solid substrates with thin dielectric membranes can restore strong thermal dependence in Casimir forces.
Researchers studied the Casimir force on thin dielectric layers covered with graphene. They used both theory and experiments to investigate this force.
One object is a solid gold plate. The other is a suspended dielectric membrane covered with graphene. This membrane can be 15 nm of silicon oxide or 13 nm silicon nitride.
A dielectric membrane is a thin suspended layer. Graphene is a material that covers these layers. The Casimir force is a force that can be measured experimentally at small separations.
At a separation of 500 nm, theoretical predictions show changes in Casimir pressure. These changes reach up to 54% for silicon oxide and 40% for silicon nitride when temperature rises from 10 K to 294 K.
Measurements used a gold-coated sphere on a cantilever as a force sensor. The measured force gradient matches theoretical predictions. However, the thermal dependence could not be resolved due to uncertainties in silicon nitride optical properties.
Replacing a bulk substrate with a thin dielectric membrane reduces the Casimir force. This may facilitate the stable operation of neutral nanomechanical elements at small separations.
Key facts
- Theoretical predictions show Casimir pressure changes of up to 54% for silicon oxide when temperature increases from 10 K to 294 K.
- Replacing a solid substrate with a thin dielectric membrane partially restores strong thermal dependence.
- The measured force gradient for graphene on a silicon nitride membrane is consistent with theoretical predictions.