Teaching robots to change the shape of flexible objects
A new tutorial explains how robots can automatically manipulate deformable objects using a feedback loop.
Robots can be taught to perform shape control, also called shape servoing. This process allows for the automatic manipulation of a deformable object to reach a desired shape.
The method uses a feedback loop. This loop uses the relation between robot motion and changes in the measured shape.
This relation is called the deformation Jacobian. It depends on the geometry, mechanical properties, and boundary conditions of the object.
The deformation Jacobian can be estimated locally. This is done from observed shape changes caused by commanded robot motions without a fine-tuned mechanical model.
The tutorial uses a simulated planar example. In this example, two robot arms manipulate an elastic rod while a camera observes it.
Some target shapes cannot be reached. The tutorial also derives a local stability condition for the shape-servoing loop.
Key facts
- Shape servoing involves a feedback loop between robot motion and shape changes.
- The deformation Jacobian can be estimated locally from observed shape changes.
- The deformation Jacobian depends on geometry, mechanical properties, and boundary conditions.