New antenna system for underground mine communications
The QuadBeam system uses four movable antennas to help maintain reliable signals in mine tunnels.
Engineers developed QuadBeam, a compact mesh node antenna system. It uses four 2.4~GHz patch antennas on a central hub. It also includes a 900~MHz monopole for backup voice communication.
The system uses independently positionable antennas. A mesh node is a device used to maintain communication. Fading is a severe, spatially localized loss of signal. Moving antennas may mitigate these fades by adjusting antenna position.
A preliminary prototype uses one motor-driven patch mount and three manually adjustable mounts. Testing occurred at the Edgar Experimental Mine. Researchers measured five carrier frequencies from 2.40~GHz to 2.48~GHz.
Received-power variations were between 19~dB and 26~dB at distances of 8.3~m to 18.3~m. Adjusting the receiver height by approximately 20~cm yields received-power improvements of up to 22~dB. Moving other antennas or the monopole produced no noticeable change in the active link.
Mine accidents can damage the wired backbone supporting underground wireless networks. This forces rescue teams to deploy temporary mesh nodes to maintain communication with the surface.
Key facts
- The QuadBeam system uses four independently positionable 2.4~GHz patch antennas.
- Adjusting receiver height by 20~cm can improve received-power by up to 22~dB.
- The system includes a 900~MHz monopole for backup voice communication.