A single resistor changes how an oscillator behaves

Researchers moved an Aliev-Panfilov excitable oscillator from chaotic to regular operation using one resistor.

A single resistor moves a discrete analog realization of the forced Aliev-Panfilov excitable oscillator. It moves the model from a chaotic operating point to a regular one.

The input resistor of the excitation integrator sets a rate parameter. This parameter multiplies the complete right-hand side of the excitation equation, including the forcing term. An excitable oscillator is a model used in this work.

Measured excitation excursion agrees with numerical integration within three percent at the baseline setting. At the rate-controlled setting, it agrees within five percent. The excitation excursion contracts by a factor of thirteen between the two settings.

At the rate-controlled setting, the recovery excursion exceeds prediction by a factor of eight. This excess traces to a displaced operating point on the state-dependent recovery rate.

Thermal drift in the multiplier chain or leakage at the high-impedance recovery-rate divider could produce this. A tested bipolar input stage strongly loads that divider. The divider sets the amplifier input-stage requirement.

Key facts

  • The excitation excursion contracts by a factor of thirteen between settings.
  • The measured excitation excursion agrees with numerical integration within three to five percent.
  • The recovery excursion exceeds prediction by a factor of eight at the rate-controlled setting.

All sections

Edition